Prices start at AED 420 per tyre fitted for a value EV tyre in 17 or 18 inches and rise with rim size and brand. A pair of Hankook iON evo in 255/45 R19 for a Tesla Model Y sits in the middle of the range; Michelin Pilot Sport EV on 21-inch wheels sits at the top. We quote the exact tyre, size and DOT date before we load the van, so the figure you agree is the figure you pay.
If you are still choosing between brands, our EV tyre brands hub compares the options we stock, and the EV tyre price guide shows typical figures by size.
What's different on an EV
An electric car loads its tyres harder than a petrol car of the same size. A Tesla Model Y Long Range weighs around 2,000 kg, roughly 300–400 kg more than a comparable petrol crossover, and that mass sits low in the battery pack. A replacement tyre therefore needs the load index the car was homologated with, which on many EVs means an HL or XL marking. A standard-load tyre in the same size can physically fit and still be under-rated for the weight it carries, especially with five people and luggage on a run to Hatta.
Instant torque is the other difference. Full torque from zero means the driven axle scrubs tread every time you pull away from a light on Al Khail Road, which is why EV tyres often wear 20–30% faster than owners expect. We match replacements to how you drive: a harder, low rolling resistance compound if you mostly commute and want range back, or a stickier tyre if the rear pair keeps going bald first. We also lift the car only on its marked jacking points with rubber pads, because a trolley jack in the wrong place can dent the battery casing.
When you need tyre replacement
- Tread depth at 3 mm or less in any main groove (the legal minimum is 1.6 mm, but wet-grip falls away well before that)
- Tread wear indicator bars level with the tread surface
- Cracks in the sidewall or between tread blocks from sun exposure
- A bulge or bubble on the sidewall after hitting a pothole or kerb
- Tyres more than five years old by the DOT date code, even with tread left
- A puncture outside the repairable zone, or a second puncture close to an old repair
- Uneven wear on one edge that has gone past the point of rotation
How we do it
- 01
Quote by size and car
Send us your tyre size from the sidewall or just the car model and year. We reply with two or three options, each with a fitted price and the DOT week the stock was made.
- 02
We come to you
A van arrives at your villa, office car park or basement with the tyres, a mounting machine, a balancer and compressor. We need about two metres of space beside the car.
- 03
Lift on the correct points
The car is raised on its marked lift points using rubber jack pads. On Teslas we put the car into jack mode first so the air suspension (on Model S and X) does not fight the lift.
- 04
Mount, balance and torque
Old tyres come off, valves or TPMS sensors are checked, new tyres are mounted and dynamically balanced, then wheel nuts are torqued by hand to the maker's figure, typically around 175 Nm on Model 3 and Model Y.
- 05
Set pressure and hand over
We set cold pressure to the door placard, confirm the TPMS reads all four wheels, and take the old tyres away for disposal unless you want to keep them.
Should you replace two tyres or four on an EV?
Replace in pairs on the same axle as a minimum, and replace all four if the remaining pair has less than about 4 mm left. Mixing a new tyre with a half-worn one on the same axle upsets the traction control and, on all-wheel-drive EVs, can make the front and rear motors see different wheel speeds.
On a rear-drive car such as a Model 3 Rear-Wheel Drive or a BYD Seal RWD, the rear pair typically goes first. Fitting two new tyres there and leaving 5 mm fronts in place is sensible and saves money. Where people overspend is replacing four when two would do, or underspend by buying a single tyre for an all-wheel-drive car and hoping the difference in diameter does not matter.
Our rule of thumb is simple: if the tread difference between the new tyre and the one beside it would be more than 2 mm, we suggest doing the pair. If you are at 3 mm all round, do the set and rotate from day one so they wear together.
- Rear-drive EVs: rear pair usually first, fronts at the next change
- All-wheel-drive EVs: keep all four within 2 mm of each other
- New tyres go on the rear axle when fitting only two, for stability in the wet
- Never mix a foam-lined tyre with a plain one on the same axle if you care about cabin noise
Reading the sidewall before you buy a replacement
The four markings that matter are size, load index, speed rating and the DOT date. A typical Model Y sidewall reads 255/45 R19 104W XL with a DOT code ending in four digits such as 3225, meaning week 32 of 2025. Match the size and load index exactly, match or exceed the speed rating, and refuse anything with a date code more than two years old.
EV-specific markings are worth knowing too. Tesla OE tyres carry a T0 or T1 mark, Pirelli uses Elect, and many brands now print HL, a newer high-load class that carries more weight than XL in the same size. Our blog post on EV tyre markings explained goes through each one with photos.
You do not have to buy the OE-marked tyre. A non-T0 tyre of the correct size and load is legal and safe on a Tesla. What you may give up is the acoustic foam and the tuning Tesla asked for, so we tell you which equivalents keep the foam.
What your old tyres tell us about the next set
The worn tyres coming off your car are the best guide to the next set. Before we fit anything we look at where the tread has gone, because it tells us about alignment, pressure and driving style in a way a spec sheet cannot.
Bald inner shoulders on the rear of a Model Y point to camber and toe, not to a bad tyre, and a new set will go the same way unless the wheel alignment is corrected. Wear in the centre of the tread means the tyres were over-inflated, often because someone set them hot at a petrol station at 3 pm in August. Feathered edges on the fronts suggest toe-out. Even wear across the face with fast overall loss usually just means a heavy right foot and a soft OE compound.
We use what we see to steer the choice. A driver who wore out OE Michelin Pilot Sport EV in 25,000 km of mostly highway driving may get better value from a harder-wearing touring EV tyre. Someone whose tyres died of age with tread left can save money with a mid-range brand, because they will never use the extra life of a premium compound.
Fitting in a Dubai basement car park
Most of our replacements happen in residential basements in Dubai Marina, JLT, Business Bay and Downtown, and we plan for them. The van usually stays at the building's loading bay or visitor parking, and we carry the tyres and a compact machine down to your bay. If your bay is tight against a pillar, we roll the car a few metres to a wider space with your permission.
Tell us the building name and basement level when you book, and register the van with security if your tower requires it. Some buildings in Business Bay only allow contractor vans between 9 am and 6 pm, so for those we book a daytime slot. Low ceilings rarely matter because we lift the car only 10–15 cm.
Villa communities are easier. In Arabian Ranches, Dubai Hills or Al Reem in Abu Dhabi, we work on your driveway, and in summer we start early to keep the tyres and the technician out of the midday sun.
